CNC Port Match Service for Edelbrock 7111 Intake Manifold. Send us your manifold, and we port match it!
Edelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d.
This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response.
Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519, #61025
Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.
Edelbrock 7111 Premier CNC Port Match Service
Ships in 3-5 weeks after arrival at Performance Driven Design.
Let's talk CNC port match for a moment!
Our CNC port match holds a simple concept at heart - Move Air.
The intake manifold, in it's simplest form, is an extension of your intake port. So, why would you not port match it? That's a good question!
Our CNC port match program opens up the "as-cast" intake ports on this manifold to more closely match the intake gasket. It seamless blends into the runner roughly 2.5" deep, where the as-cast runner reaches a more appropriate size for the application.
With any "as-cast" item, some port shadowing will be present. This is perfectly normal, and is not controllable by PDD. We machine our ports where they are supposed to be, and occasionally the casting errs to the shy stock side.
PDD's port match is designed to leave .045" around the perimeter, inside the gasket. By designing our port match in this manner, you have more flexibility in alignment due to variance in block deck height, intake port height, etc. It is far more important to leave the intake port smaller, rather than risk a ledge which can lead to fuel puddling, turblence, and otherwise unsavory horsepower robbing issues.